MOT202T and V.23 Analog Modems

$0.00
In stock
Only 0 left
 
Raymar-Telenetics recognizes the growing need for efficient, reliable data communications in the harsh environments of "remote" remote sites and industrial facilities. In response to this need, Raymar-Telenetics has developed a family of data communications products that can operate from various AC & DC power supplies and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communications devices. Raymar-Telenetics introduces the latest addition to the family of industrial grade, temperature hardened Raymar-Telenetics MOT202T Modems. The Raymar-Telenetics MOT202T is a pin-for-pin, form, fit, and function replacement for the Motorola UDS Model RM16M202T, 202T, 202S/Tm and 202S/D. A must for industrial applications, the Raymar-Telenetics MOT202T (Standalone) features built-in diagnostic, anti-streaming, multi-power inputs (115 to 240AC, 12 to 125VDC) and -40°C to +85°C operating range capabilities. The Raymar-Telenetics MOT202T modem operates over leased or dedicated, loaded or unloaded lines equal to or better than the ITU (formerly CCITT) M.1020/1025 or the Bell 3002 leased line services. It operates over point-to-point or multi-point polled systems and operates in full or half-duplex over 4-wire or 2-wire circuits. The Raymar-Telenetics MOT202T modems are a direct replacement for the very popular 30-year-old (a de facto 202 modem standard) design that Motorola acquired through the purchase of Universal Data Systems.

  • 2-wire half duplex or 4-wire 202 modem full duplex private line operation
  • 0 to1200 bps data rate over unconditioned lines and 1,800 over high quality lines
  • Antistreaming
  • Phase coherent, frequency shift keyed (FSK) modulation
  • V.23 modulation
  • V.24 and RS232 Data Port
  • LED indicators Front panel rotary switch function selector
  • Integral test features
  • Temperature rated -40 to +85°C
  • 12, 24, 48, 125VDC power
  • 115VAC, 60Hz - 220/240VAC 50Hz power

  • Data Rate: 0 up-to 1,800bps asynchronous
  • Operation: Full duplex over 4 wire private lines or half duplex over 2-wire private lines
  • Modulation: Phase coherent, frequency shift keyed (FSK) and V23
  • Carrier Frequencies: Mark: 1200 Hz Space: 2200 Hz
  • Line Impedance: 600 ohms 10% transformer coupled and transient protected
  • Transmitter Output Level: Selectable from 0, to -12 dbm in 2 dbm steps
  • Clear to Send Delay: 8.3 ms, 33.2 ms, 59.9 ms, or 219.6 ms (selectable)
  • Carrier Detect Delay: 6 ms or 23 ms
  • Digital Interface: EIA RS-232 (DB-25 female) and CCITT V.24
  • Telco Interface: RJ45 female
  • Turnaround Squelch: 0 ms, 8.3 ms, or 159.6 ms
  • Antistreaming: 4, 7.6, 14, 28, 56, none (selectable)
  • Soft Carrier Turnoff: 0 ms, 8.3 ms, or 26.6 ms
  • Environmental: -40 to +85°C; 95% humidity, noncondensing
  • Mechanical: Width: 7"; Height 2.25"; Depth: 9.60"; Weight 3.0 Lbs.
  • AC Power Requirement: 115 VAC and optional 220/240VAC 50hz, @ 10 watts max
  • DC Power Requirements: 12 to 60 VDC, optional 125 VDC

  • Test Operate SwitchDL (Digital Loopback): When the switch is in the ST position, the received data is looped back into the transmitter and the data is transmitted to the remote end. The modem must be in the 4 wire mode.
  • TTP (Transmit Test Pattern): When the switch is in the TTP position, the transmitter is forced ON and transmits the date from the dot pattern generator to the COMM Line. The RS-232 interface lines to the transmitter are not active (RS, CS, TD).
  • DATA: The switch must be in the DATA position for all normal data transmission indicators.
  • RS (Request to Send): Illuminated when the RS line is high (ON).
  • CS (Clear to Send): ON when the CS line is high (ON).
  • CD (Carrier Detect): ON when a carrier is detected by the modem receiver.
  • RD (Receive Data): ON when data is received, decoded, and furnished to the terminal equipment. RD is also ON when the receive cats line goes into a space condition, OFF in a mark condition.
  • TD (Transmit Data): Responds in the same manner as the RD LED, but only when data to be "transmitted" is furnished to the modem. However, the LED may be on when the DTE is disconnected.
  • TM (Test mode): Active when Test switch is in any test mode. The indicator will blink OFF/ON when errors occur in Self Test mode.
  • POWER: ON when power is applied.

The Telenetics MOT202T modem is a Frequency Shift Keyed (FSK) modem which is designed for asynchronous operation at 0 to 1800 bps with good line conditioning, or 0 to 1200 bps asynchronous operation on unconditioned lines. The modem provides half duplex communications on 2 wire private lines or full duplex communications on 4 wire private lines, and is ideal for use in multipoint networks.The 202 modem is a single printed circuit card enclosed in a new compact size housing. The unit features an integral anti-streaming protection option which prevents network Tie-ups by incorporating a delay timer that will disconnect a modem, if it remains in transmit mode longer than a selectable period of time. The 202 modem also features strap options for Request to-Send/Clear to Send Delay timing, Transmit Carrier, local Copy Squelch, Turnaround squelch, Soft Carrier Turn Off, Carrier Detect Level, Carrier Detect Delay, and Test Generator Baud Rate Select. These strap options allow the user greater control of the modem, for his individual application.

The Telenetics MOT202T modem features built-in diagnostic and anti-streaming capabilities. The anti-streaming capability prevents a modem from remaining in the transmit mode when the modem is not actively transmitting data. The diagnostic features allow the user to verify transmitted and received data.

The modem is designed to be interchangeable between the Universal Data Shelf multiple modem enclosure (RM16M series) and the stand alone modem enclosure. By removing the modem card and attaching the optional front panel, the modem can be directly inserted into the Universal Data Shelf. With this feature, a data-communications facility can be easily upgrade front multiple standalone enclosures to a centralized rack without the expense and trouble of purchasing new modems. Telenetics had to change some of the older chips for newer analog filters which gives new life to a world class modem. With these new changes we can offer an even a better unit - now with wider voltage choices and a temperature range.


Part Number Description
Telenetics / Motorola MOT202T & V.23 Standalone
MOT202TSA Bell 202T, 1800bps, SA, Leased Line, 110/120VAC, 60Hz
MOT202TSA-220 Bell 202T, 1800bps, SA, Leased Line, 220/230VAC, 50Hz
MOT202TSADC Bell 202T, 1800bps, SA, Leased Line, 10-60VDC, Low Voltage
MOT202TSADC-HV Bell 202T, 1800bps, SA, Leased Line, 90-265VDC, High Voltage
MOTV23SA V.23, 1200bps, SA, Leased Line, 110/120VAC
MOTV23SADC V.23, 1200bps, SA, Leased Line, 5-60VDC
MOT202T & V.23 Rackmount
MOT202TRM Bell 202T, 1800bps, RM, Leased Line
MOTV23RM V.23, 1200bps, RM, Leased Line
Accessories
MOT-202T-RMPNL Front Panel, RM, MOT202T
MOT/MTGK-DIN MOT202TSA, DIN RAIL MOUNTING KIT
 

 
Write Your Own Review
You're reviewing:MOT202T and V.23 Analog Modems